-
-
-
Enterprise Advantage
-
-
Please pay attention to these signs when the chassis parts appear
Release time:
2021-03-17 00:00
Source:
Chassis as one of the three major parts of the car
Undertake the transmission, driving, steering and braking of the vehicle
plays an important role in the driving process
If the chassis components show these small signs
Please pay attention
01 SHOCK ABSORBER
When the vehicle is driving on uneven roads, if there are violent bumps or abnormal noises, it may be a precursor to the failure of the shock absorber. It is recommended that the owner enter the station as soon as possible for inspection and repair or replacement.
02 Suspension control arm rubber sleeve
After the rubber sleeve is damaged, the vehicle will have faults such as deviation and pendulum. If the rubber sleeve cracks severely and falls off, there will be a safety hazard during the driving of the vehicle.
03 Steering Rod
The method of detecting the tie rod is not difficult: during normal driving, if the steering wheel shakes significantly or there is abnormal noise when turning, it is recommended that the owner go to the service station for further inspection.
04 Exhaust pipe
Exhaust blockage can easily lead to problems such as reduced engine power or insufficient gasoline combustion. For example, when the car has weak acceleration or slight backfire at the fuel valve, it needs to be detected in time.
50000 joint boot
If the dust cover of the universal joint is damaged, the grease around the universal joint will quickly lose. Once the grease is exhausted, it will aggravate the wear of the universal joint.
· Chassis maintenance strategy ·
1. Clean the chassis regularly
Clean the chassis regularly, especially after driving in rain, snow or bad road conditions, to avoid the appearance of corrosive substances in the chassis, and to reduce the corrosion and friction loss of sewage and sediment on the car chassis parts.
2. Regularly check the chassis protection plate
Chassis protection plate can defend the gravel section of the "attack", regular inspection of the chassis protection plate, as far as possible to reduce the damage to the vehicle chassis.
3. Regular inspection of chassis components and systems
Mainly check the transmission, driving, steering and braking functions of the vehicle, as well as various parts and connectors, and regularly go to the brand authorized service station for professional inspection to ensure that the vehicle is in a good state.
Related News
What is a brake backing plate?
The brake base plate is the key part of the brake base plate assembly, the supporting part for fixing the brake shoe assembly and the brake drum assembly in the automobile brake, and the core of the whole vehicle braking. The brake base plate is the key part of the brake base plate assembly, the supporting part for fixing the brake shoe assembly and the brake drum assembly in the automobile brake, and the core of the whole vehicle braking.
The working principle of the nut is to use the friction between the nut and the bolt for self-locking. However, the reliability of this self-locking decreases in dynamic loads. In some important occasions, we will take some anti-loose measures to ensure the reliability of nut locking. Locking nut is one of the anti-loose measures.
How much do you know about the maintenance of automobile chassis parts?
The car chassis is one of the most critical position of the car. Many important auto parts are on the car site, so the maintenance of the car chassis is also very important, but many car friends do not know the relevant knowledge about the car chassis very well. The following is the editor for the car friends to sort out some relevant knowledge about the car chassis.
Contact Us
-
Telephone: 0086-595-2242 9918
Fax: 0086-595-2242 9917
Mobile: +86-159-5995-3123
E-mail: hjjx@qzhjjx.cn
Address: No. 23 Binjiang Avenue, Nanan Binjiang Industrial Zone, Quanzhou, Fujian, China
Website